H301-PRIOR-H117

Stage compatibility: PRIOR H117 - comes with Sliding Lid
 
Magnetic interchangeable inserts allow to use:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
  • 6-12-24-48-96 MW plates
Features:
  • Sliding lid for easy pipetting
  • Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
  • Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
  • Magnets allow easy interchange of chamber inserts
  • Magnetic locks hold Petri, Slides and MW in correct position inside the chamber
  • Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in the chamber riser

 

H301-K-FRAME - slided_480x320.JPG

H301-PRIOR H117 - slim profile 

Koehler illumination ?

Remove the chamber riser and use the Koehler Lid


H301-PRIOR H117 - perfusion holes

Perfusion ?

Each chamber features up to 12 holes for inlet and outler of perfusion tubings


Chamber Inserts and Sample Locks - magnetic

Different sample holder ?

Change the chamber insert. It is a 5 seconds task with the magnetic sample holders

Keep the sample in the correct position by using the Magnetic Locks

 

 

Available Inserts

6MW 6 well plates 6-MW.JPG
12MW 12 well plates 12-MW.JPG
24MW 24 well plates 24MW.JPG
24MW-NUNC 24-well NUNC/GREINER plates 24MW-NUNC.JPG
48MW 48-well plates 48MW.JPG
96MW 96-well plates. 96MW.JPG
MW-OIL Open frame to image multi well plates with oil immersion objectives MW-OIL.JPG
1x35-M #1 35mm Petri-dish 1x35-M.JPG
1xGS-M #1 1x3in. chamberslide 1xGS-M.JPG
1xLABTEK-M #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M.JPG
1xLABTEK-II-M #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-M.JPG
1x60-M #1 60mm Petri-dish 1x60-M.JPG
1xT25-M #1 Nunc and Greiner T25 flask 1xT25-M.JPG
2x35-M #2 35mm Petri-dish 2x35-M.JPG
2xGS-M #2 1x3in. chamberslides 2xGS-M.JPG
2xLABTEK-M #2 Lab-Tek 1x2 in. chambered cover glass 2xLABTEK-M.JPG
2xLABTEK-II-M #2 Lab-Tek II 1x2 in. chambered cover glass 2xLABTEK-II-M.JPG
2x60-M #2 60mm Petri-dish 2x60-M.JPG
4x35-M #4 35mm Petri-dish 4x35-M.JPG
GS35-M #1 1x3in. chamberslide and #2 35mm Petri-dish GS35-M.JPG
LABTEK-35-M #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-35-M.JPG
LABTEK-II-35-M #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-II-35-M.JPG
LABTEK-60-M #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-60-M.JPG
LABTEK-II-60-M #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-II-60-M.JPG
GS60-M #1 1x3in. chamberslide and #1 60mm Petri-dish GS60-M.JPG
6035-M #1 60mm Petri-dish and #1 35mm Petri-dish 6035-M.JPG

Available LIDs

H301-KOEHLER LID Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID.JPG
H301-INJECTION-LID Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen Note: compatible only with specimen holder 1x35 H301-INJECTION-LID.JPG
H301-LASER-INTERLOCK-LID Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted Note: compatible only with specimen holder 1x35 H301-LASER-INTERLOCK-LID.JPG
H301-PRIOR H117-[SLIDING LID]_600x600.jpg
H301-PRIOR-H117 with Sliding Lid
H301-PRIOR H117-[KOEHLER LID]_600x600.jpg
H301-PRIOR-H117 with Koehler Lid
H301-K-FRAME-LID_600x600.jpg
H301-PRIOR-H117 - Available Lids
H301-PRIOR H117-[SLIDING LID]-[DIMENSIONS]_600x600.jpg
H301-PRIOR-H117 with Sliding Lid - Dimensions
H301-PRIOR H117-[KOEHLER LID]-[DIMENSIONS]_600x600.jpg
H301-PRIOR-H117 with Koehler Lid - Dimensions
H301-K-FRAME-[MAGNETIC LOCKS]_600x600.jpg
H301-PRIOR-H117 - Magnetic sample locks

H301-K-FRAME-[ADAPTERS-2]_600x600.jpg
H301-PRIOR-H117 - Magnetic Inserts
H301-K-FRAME-[ADAPTERS]_600x600.jpg
H301-PRIOR-H117 - Magnetic Insterts
H301-PRIOR H117-[6MW]_600x600.jpg
H301-PRIOR-H117 - 6MW Plate - requires chamber riser
 
 

Customer care is our top priority

CONTACT US

Okolab S.r.l.

FACTORY NAPOLI: Via A. Olivetti, 1 - 80078 Pozzuoli, NA, Italy

FACTORY ROVERETO: Via delle Zigherane - Edificio B08.01, 38068 Rovereto, TN, Italy

 

  • Luca Lanzaro Ph.D
  •   Phone: +39 081 8062624
  •   E-mail: info[at]oko-lab[dot]com

Okolab USA Inc.

417 Thorn St., Suite 309, Sewickley - PA 15143, USA

 

  • Lara Petrak
  • Mobile: +1 (650) 410 0756
  • Rob Davison
  • Phone: +1 (650) 228 6154
  •   E-mail: usa[at]oko-lab[dot]com

Okolab Shanghai Co., Ltd.

Room 2604, Jiande Apartment, No. 9 Jiande Road, Huangpu District, Shanghai 200025, China

 

  • Pony Tong
  • Mobile: +86 18500508458
  •   E-mail: tong[at]oko-lab[dot]cn
 

COPYRIGHT © OKOLAB S.R.L. ALL RIGHT RESERVED. CERTIFIED ISO 9001.