H301-LLSM-3i-V2

Especially developed by Okolab for all users of 3i LLSM V2.
Chamber’s base made by stainless steel type AISI 316.
 
Features:
  • Compatible with 3i LLSM V2
  • Operated by Okolab BOLD LINE temperature/gas/humidity controllers
  • Chamber’s base made by stainless steel type AISI 316
  • Cells are mounted on a standard, horizontally-oriented 5mm round coverslip
  • Uniformly heated by means of embedded electric resistances
  • Collars for objectives in use, included
  • Supporting brackets included
  • To control the humidity into the chamber humidity module is recommended: HM-ACTIVE
H301-LLSM-3I-V2_480X320.jpg
H301-LLSM-3i-V2
H301-LLSM-3I-V2_420X280.jpg
H301-LLSM-3i-V2

Koehler illumination ?

Remove the chamber riser and use the Koehler Lid

H301-LLSM-3I-V2_components_420X280.jpg
H301-LLSM-3i-V2 base and lid

Perfusion ?

Each chamber features up to 12 holes for inlet and outler of perfusion tubings

H301-LLSM-3I-V2_collars-for-objectives_420X280.jpg
H301-LLSM-3i-V2 and collars for objectives

Different sample holder ?

Change the chamber insert. It is a 5 seconds task with the magnetic sample holders

Keep the sample in the correct position by using the Magnetic Locks

 

 

 
 
 

Customer care is our top priority

CONTACT US

Okolab S.r.l.

FACTORY NAPOLI: Via A. Olivetti, 1 - 80078 Pozzuoli, NA, Italy

FACTORY ROVERETO: Via delle Zigherane - Edificio B08.01, 38068 Rovereto, TN, Italy

 

  • Luca Lanzaro Ph.D
  •   Phone: +39 081 8062624
  •   E-mail: info[at]oko-lab[dot]com

Okolab USA Inc.

417 Thorn St., Suite 309, Sewickley - PA 15143, USA

 

  • Lara Petrak
  • Mobile: +1 (650) 410 0756
  • Rob Davison
  • Phone: +1 (650) 228 6154
  •   E-mail: usa[at]oko-lab[dot]com

Okolab Shanghai Co., Ltd.

Room 2604, Jiande Apartment, No. 9 Jiande Road, Huangpu District, Shanghai 200025, China

 

  • Pony Tong
  • Mobile: +86 18500508458
  •   E-mail: tong[at]oko-lab[dot]cn
 

COPYRIGHT © OKOLAB S.R.L. ALL RIGHT RESERVED. CERTIFIED ISO 9001.